*Without coating
*With TIN coating-yellow coated
*With TILAN coating-black coated

12x25mm: 25g/pc
14x25mm: 30g/pc
18x25mm: 50g/pc
23x25mm: 80g/pc

F-Head Six-Lobe Slot Titanium Plating Punch

Hexagonal Round Bar

P-Head Six-Lobe Punch with Black Titanium Plating

Six-Lobe Hexagonal Punch

Six-Lobe Punch

Six-Lobe tamper Punch

Six-Lobe Titanium Plating Punch

Please specify the details of header punches as follows when you inquire or order:
1. The material of header punches you need or the material of screw you used;
2. The specification of standard you use, for examples: JIS, ANSI or DIN;
3. Screw Application: Machine Screw , Tapping Screw , Wood Screw or any others;
4. Head Style: Flat head , Pan head , Truss head , Binding head or any others;
5. Nominal Size: JIS-M20, M23; ANSI-#4, #8; DIN-M30, M35;
6. Recess Driver: Phillips , Slot, Phillips and Slot Combination, Pozi ect;
7. Dimension : 12×25, 14×25, 18×25, 23×25;
8. Coated : Plian , TIN Coated , TILAN Coated.

COMMON QUESTIONS IN USING SCREW AND NUT MOLD:
1.The master worker have the experience of mold and structural design , analyzing the reason of the unreasonable distribution of die stress ratio and deformation.
2.The cleanliness of the mold, the inner hole finish is not enough.
3.The rigidity of shell sleeve material, the heat resistance,and the heat treatment hardness are unreasonable.
4.In order to save the cost of production, they selected poor quality tungsten carbide steel and wire rod, alloy specifications and steal material nailing serious wheels are unreasonable.
5.The collider is not appropriate, without replacing lubricants and checking machine long-term.
6.The master worker of adjusting must have high technical level.