Isihloko Esibandayo Sishaya I-Carbide Punches Futhi Ifa
Umsebenzi: I-Punch dies isetshenziswa ngokuhambisana ne-punch press noma eminye imishini efanayo.I-punch die ifakwe emshinini futhi ibekwe phezu kwezinto okumele zishaywe.Lapho umshini wokunyathelisa we-punch ucushiwe, kusetshenziswa amandla, okubangela ukufa kwe-punch ukuze kungene ezintweni bese kwakheka umumo oyifunayo.
Ukwenza ngokwezifiso: I-punch yensimbi iyafa ingenziwa ngezifiso ukuze ihlangabezane nezidingo ezithile.Lokhu kuhlanganisa ukulungisa usayizi, idizayini, noma umumo ukuze kuhlangatshezwane nezinhlelo zokusebenza ezihlukene, osayizi bezimbobo, noma ubukhulu bempahla.
I-Versatility: I-steel punch dies isetshenziswa ezinhlobonhlobo zezimboni, ezihlanganisa ezezimoto, i-aerospace, electronics, ukwakha, nokunye.Zivame ukusetshenziselwa ukudala izimbobo zezinsimbi, umoya omncane, izintambo, nanoma yiluphi olunye uhlobo lwembobo edingekayo ensimbi noma kwezinye izinto.
12x25mm: 25g/pc
14x25mm: 30g/pc
18x25mm: 50g/pc
23x25mm: 80g/pc
| Into | Ipharamitha |
| Le yindawo ka Origin | I-Guangdong, China |
| I gama le-brand | Nisun |
| Okubalulekile | High-Speed Steel |
| Indlela Yokucubungula | Ukubhoboza nokugunda Isikhunta |
| Isitifiketi | ISO9001:2015 |
| Inombolo Yemodeli | Okujwayelekile noma okwenziwe ngokwezifiso |
| Okujwayelekile kwe-header punch | I-JIS, i-ANSI, i-DIN, i-ISO, i-BS, i-GB, ne-NON-SANDARD,Idizayini eyenziwe ngokwezifiso |
| Ukubekezelelana | +-0.005mm |
| Ukuqina | Ngokuvamile i-HRC 61-67, incike ezintweni ezibonakalayo |
| Inhlanganisela Yenqubo | I-Progressive Die |
| Isetshenziselwa | Noma yimiphi Imishini Yokucindezela Ithebulethi Ephelele ene-Type D Tooling |
| Usayizi ojwayelekile | 12x15/25mm, 14x15/25mm, 18x18/25mm, 23x25mm |
| Ubuchwepheshe | CAD, CAM, WEDM, CNC, Vacuum ukwelashwa ukushisa, 2.5-Dimensional Testing (projector), umhloli wokuqina, njll.(HRC/HV) |
F-Head Six-Lobe Slot Titanium Plating Punch
Ibha Eyindilinga eyiHexagonal
I-P-Head Six-Lobe Punch ene-Black Titanium Plating
I-Six-Lobe Hexagonal Punch
I-Six-Lobe Punch
I-Six-Lobe tamper Punch
I-Six-Lobe Titanium Plating Punch
Sicela ucacise imininingwane yokubhantshi kwanhlokweni kanje uma ubuza noma u-oda:
1. Impahla yezibhakela zikanhlokweni ozidingayo noma into yesikulufu osisebenzisile;
2. Ukucaciswa kwezinga olisebenzisayo, izibonelo: i-JIS, i-ANSI noma i-DIN;
3. Isicelo se-Screw: Isikulufu Somshini, Isikulufu Sokucofa, Isikulufu Sezinkuni nanoma yiziphi ezinye;
4. Isitayela Sekhanda: Ikhanda eliyisicaba , Ikhanda le-pan , Ikhanda le-truss , Ikhanda elibophayo noma yimuphi omunye;
5. Usayizi Ojwayelekile: JIS-M20, M23;ANSI-#4, #8;I-DIN-M30, M35;
6. Recess Driver: Phillips , Slot, Phillips kanye Slot Inhlanganisela, Pozi ect;
7. Ubukhulu : 12x25, 14x25, 18x25, 23x25;
8. Igcotshwe: I-Plian, i-TIN Coated, i-TILAN Coated.
IMIBUZO EJWAYELEKILE EKUSEBENZISENI ISIKHIPHU KANYE NE-NUT MOLD:
I-1.Isisebenzi esiyingcweti sinolwazi lwesikhunta nokuklama kwesakhiwo, sihlaziya isizathu sokusabalalisa okungenangqondo kwesilinganiso sokucindezeleka kokufa kanye nokuguqulwa.
2.Ukuhlanzeka kwesikhunta, ukuphela kwembobo yangaphakathi akwanele.
3.Ukuqina kwempahla yemikhono yegobolondo, ukumelana nokushisa, nobulukhuni bokwelashwa kokushisa akunangqondo.
4.Ukuze bonge izindleko zokukhiqiza, bakhethe insimbi ye-tungsten carbide esezingeni eliphansi kanye nenduku yocingo, imininingwane ye-alloy kanye nezinto ezintshontshayo zokubethela amasondo angathi sína akunangqondo.
5.I-collider ayifanele, ngaphandle kokufaka izinto zokugcoba kanye nomshini wokuhlola isikhathi eside.
6.Ingcweti yomsebenzi wokulungisa kumele ibe nezinga eliphezulu lobuchwepheshe.
