Umkhiqizi wePunch we-Six-Lobe Carbide Punch kanye Nefekthri |Nisun

I-Six-Lobe Carbide Punch

Six-Lobe Carbide Punch Isithombe Esifakiwe

Incazelo emfushane:

● I-carbide punch iyithuluzi elikhethekile elisetshenziselwa ukudala izimbobo ezinembile noma ama-indents ezintweni ezifana nensimbi noma ipulasitiki.

● Izibhakela ze-Carbide zenziwe ngento eqinile futhi ehlala isikhathi eside ebizwa ngokuthi i-carbide, ezenza zimelane kakhulu nokugqokwa futhi zibe nempilo ende yesevisi.

Thumela i-imeyili kithi Landa njenge-PDF

Imininingwane Yomkhiqizo

Omaka bomkhiqizo

Punch Press Dies Suppliers

Lapho usebenza ngezibhakela ze-carbide, kubalulekile ukugqoka izinto zokuzivikela ezifanele, njengezibuko zokuphepha namagilavu.

I-punch kufanele ibanjwe iqine futhi ishaywe ngesando noma i-mallet ukuze udale imbobo oyifunayo noma uphawu.Kubalulekile ukusebenzisa amandla alinganayo futhi ugweme umthelela oweqile, ongalimaza isibhakela noma okokusebenza okucutshungulwayo.

Ngemuva kokusetshenziswa, ama-punch e-carbide kufanele ahlanzwe futhi agcinwe endaweni eyomile, ephephile ukuvimbela ukugqwala noma ukulimala.Ukuze kuqinisekiswe ukusebenza kahle, ukunakekelwa ngezikhathi ezithile, njengokusenda isihlabathi noma ukulungisa kabusha, kungase kudingeke.

Isisindo seyunithi mayelana nepunch kanhlokweni

12x25mm: 25g/pc
14x25mm: 30g/pc
18x25mm: 50g/pc
23x25mm: 80g/pc

Ipharamitha

Into	Ipharamitha
Le yindawo ka Origin	I-Guangdong, China
I gama le-brand	Nisun
Okubalulekile	High-Speed Steel
Indlela Yokucubungula	Ukubhoboza nokugunda Isikhunta
Isitifiketi	ISO9001:2015
Inombolo Yemodeli	Okujwayelekile noma okwenziwe ngokwezifiso
Okujwayelekile kwe-header punch	I-JIS, i-ANSI, i-DIN, i-ISO, i-BS, i-GB, ne-NON-SANDARD,Idizayini eyenziwe ngokwezifiso
Ukubekezelelana	+-0.005mm
Ukuqina	Ngokuvamile i-HRC 61-67, incike ezintweni ezibonakalayo
Inhlanganisela Yenqubo	I-Progressive Die
Isetshenziselwa	Noma yimiphi Imishini Yokucindezela Ithebulethi Ephelele ene-Type D Tooling
Usayizi ojwayelekile	12x15/25mm, 14x15/25mm, 18x18/25mm, 23x25mm
Ubuchwepheshe	CAD, CAM, WEDM, CNC, Vacuum ukwelashwa ukushisa, 2.5-Dimensional Testing (projector), umhloli wokuqina, njll.(HRC/HV)

F-Head Six-Lobe Slot Titanium Plating Punch

Ibha Eyindilinga eyiHexagonal

I-P-Head Six-Lobe Punch ene-Black Titanium Plating

I-Six-Lobe Hexagonal Punch

I-Six-Lobe Punch

I-Six-Lobe tamper Punch

I-Six-Lobe Titanium Plating Punch

Sicela ucacise imininingwane yokubhantshi kwanhlokweni kanje uma ubuza noma u-oda:
1. Impahla yezibhakela zikanhlokweni ozidingayo noma into yesikulufu osisebenzisile;
2. Ukucaciswa kwezinga olisebenzisayo, izibonelo: i-JIS, i-ANSI noma i-DIN;
3. Isicelo se-Screw: Isikulufu Somshini, Isikulufu Sokucofa, Isikulufu Sezinkuni nanoma yiziphi ezinye;
4. Isitayela Sekhanda: Ikhanda eliyisicaba , Ikhanda le-pan , Ikhanda le-truss , Ikhanda elibophayo noma yimuphi omunye;
5. Usayizi Ojwayelekile: JIS-M20, M23;ANSI-#4, #8;I-DIN-M30, M35;
6. Recess Driver: Phillips , Slot, Phillips kanye Slot Inhlanganisela, Pozi ect;
7. Ubukhulu : 12x25, 14x25, 18x25, 23x25;
8. Igcotshwe: I-Plian, i-TIN Coated, i-TILAN Coated.

IMIBUZO EJWAYELEKILE EKUSEBENZISENI ISIKHIPHU KANYE NE-NUT MOLD:
I-1.Isisebenzi esiyingcweti sinolwazi lwesikhunta nokuklama kwesakhiwo, sihlaziya isizathu sokusabalalisa okungenangqondo kwesilinganiso sokucindezeleka kokufa kanye nokuguqulwa.
2.Ukuhlanzeka kwesikhunta, ukuphela kwembobo yangaphakathi akwanele.
3.Ukuqina kwempahla yemikhono yegobolondo, ukumelana nokushisa, nobulukhuni bokwelashwa kokushisa akunangqondo.
4.Ukuze bonge izindleko zokukhiqiza, bakhethe insimbi ye-tungsten carbide esezingeni eliphansi kanye nenduku yocingo, imininingwane ye-alloy kanye nezinto ezintshontshayo zokubethela amasondo angathi sína akunangqondo.
5.I-collider ayifanele, ngaphandle kokufaka izinto zokugcoba kanye nomshini wokuhlola isikhathi eside.
6.Ingcweti yomsebenzi wokulungisa kumele ibe nezinga eliphezulu lobuchwepheshe.